Webster Fuel Pumps & Valves

Division of Capital City Tool, Inc.
219 Hahn Road, Frankfort, Ky. 40601 Tele:502-223-0025 Toll Free: 800-766-1233 Fax: 502-223-4629


 

M34DK-3
To meet the needs of today's fuel-efficient, down-sized burners, Webster's popular M34DK-3 fuel units provide fast fuel cutoff, and improved priming performance on one pipe installations. In addition, the M34DK-3 operates with a substantially reduced inlet flow on two pipe installations, resulting in significantly lower line noise. Webster's M34DK-3 fuel units are available in single stage, 3450 rpm models rated at 3 gph. Operating pressure is factory set at 100 psi. The M34DK is able to maintain its 3 gallon fire size throughout the 100 to 150 psi pressure range.UL listed. 

M SERIES FUEL UNITS
Single and two stage models with 1725 and 3450 rpm operation feature compact design and field-proven reliability. These units, rated @ 3 to 25 gph (11 to 57 1/hr.) @ 100 psi (6.9 bar), can be used on one or two pipe installations. Double lip type seals assure low starting torque and provide positive protection from leaks. M series fuel units utilize the unique Webster rotary filter to minimize maintenance. UL Listed. 

R SERIES
SERVICE SAVER FUEL UNITS
Webster's Service Saver R Series fuel units are available as both single and two stage units with capacities to 75 gph (284 1/hr.), satisfying virtually every replacement need. The R Series incorporates Webster unique rotary filter, reducing the need for periodic cleaning. To assure positive protection form leaks, double lip seals are used, providing lower friction than face type seals. UL Listed. 

V SERIES
HIGH DELIVERY FUEL UNITS
Webster V Series fuel units are designed to meet the high delivery requirements of commercial and industrial systems, with a minimum of mechanical and hydraulic noise. Available in both single and two stage models. Single stage units provide a firing rate up to 260 gph (980 1/hr) at up to 10' hg (254 mm) inlet vacuum. Two stage firing rates are as high as 200 gph (760 1/hr) at up to 15' hg (381 mm) inlet vacuum. Operational integral regulating valves are factory pre-set for 100 and 300 psi (6.9 and 20.7 bar) operation and can be easily adjusted in the field for specific system requirements. UL listed. 

B SERIES FUEL OIL
TRANSFER PUMPS
B series transfer pumps provide efficient pumping of #1 to #6 oils, in capacities from 80 to 290 gallons per hour, at pressures up to 500 psi (300 psi with #1 oil). B Series pumps are available in either right-hand or left-hand cofiguration. 18B, 37B, 47B series pumps have ” NPTF porting, and the 59B series pump has ” side inlet and side outlet porting. UL listed. 

35223, 49116, 35202 SERIES
PUMP/MOTOR UNITS
Webster 35223, 49116 and 
35202 Series pump units combine an electric motor and fuel unit or transfer pump to provider a broad range of pumping capabilities for transferring and supplying oil. The 35223 Series Pump/Motor Unit consists of a Webster B Series fuel oil transfer pump motor with working pressures up to 200 psi. The 49116 Series Pump/Motor Units consist of a Webster 1R00 Series Fuel Transfer Unit close coupled to a 1/4 hp electric motor capable of up to 66 gph at 100 psi. The 35202 Series Pump/Motor Units consist of a Webster R Series or V Series fuel unit close coupled to a motor. This series is available with 1/6, 1/4, 1/3 hp or 1/2 hp electric motors with a pumping capacity to 66 gph at 100 psi. 

SPM SERIES
SUPPLY PUMP/MOTOR UNITS
Developed to supply fuel oil to one or more overhead furnaces, day tanks, or for underground central distribution. Four pump/motor sizes are available, with capacities of 15, 30, 65 and 135 gph (57, 114, 245 and 510 1/hr). 1/6 hp, 1/4 hp and 1/3 hp (124W, 186W and 248W) motors are split phase available for either 115 or 230 volt operation. 1/2 hp (373W) motors are capacitor start -induction run, totally enclosed with dual 115/230 volt windings. The units are shipped completely assembled and include gauge, vacuum breaker and check valve. All are 60 cycle, 1750 rpm, continuous duty. 

SPM/SPMV DUPLEX
PUMP/MOTOR UNITS
The duplex pump set has a second pump for standby or auxiliary service. Furnished with automatic or manual standby controls, the duplex automatic is equipped with a pressure sensing device which detects loss of pressure of primary pump. If standby pump is brought into service, an alarm sounds which indicates malfunction in primary pump. It is equipped with a lead-lag switch to permit manual alternation of pump to provide even pump wear. Available with either SPM or SPMV pump/motor units. 

OSV SERIES
OIL SAFETY VALVES
Ideal for use in oil supply systems which have form 0 to 60 psi supply line pressures on the inlet side of the valve. Requires a sustained vacuum on the outlet side of the valve for fuel to flow to the burner pump. The OSV series provides automatic shut-off for the oil supply in case the line between the device and the burner is broken. Many state and local codes require such a device and also limit pressure on burner pumps to a maximum of 3 psi. UL listed. 

RV SERIES
FUEL OIL REGULATING VALVES
The RV series are designed to provide system pressure regulation for #1 through #6 fuel oil grades Rated pressure ranges are for 0 to 500 psi. RV-2000 models also provide delivery cut-off for capacities to 150 gph. RV-2100 regulates pressure only for capacities to 150 gph. RV-3000 regulates pressure for up to 600 gph. It can also be used as a relief valve. 

CHECK VALVE/VACUUM BREAK(48598)
Vacuum breaker valve incorporates Viton "O" Ring seat 3/8-18 NPTF ports. Can be used as a supply line check valve. 

SPMV SERIES
HIGH CAPACITY AC
PUMP/MOTOR UNITS
Designed for high capacity applications where 430 to 1730 gph are required. Efficient gear type pumps are available in eight sizes and incorporate hardened integral shafts, journals and gears, two pressure balanced war plates, special antifriction bearings, Viton seals, and cast iron gear plates. Standard motors ranging form 1/2 hp to 15 hp (373W to 11.2Kw) are 1725 rpm NEMA "C" face, 115 volt single phase or 230 volt three phase, 60 cycle type with TEFC enclosures through 2 hp (1490W) and OPDP enclosures over 2 hp(1490W). 

Go Back